► Support 48-Port 1000Base-X SFP + 6-Port Gigabit TP/SFP + 4-Port 10GBase-X SFP+
► Support layer 3 network management
► Support 32K MAC learning, 8Mbit storage and forward cache space, 176G back plane bandwidth
► 1U19-inch standard chassis
UF-FS48G6C4X 48-Port SFP Fiber Switch are standard layer 3 non-blocking switch with 48-Port Gigabit SFP, 6-Port Combo Ethernet and 4-Port extensible 10G SFP+, based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, UF-FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C4X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
► Support 48-Port 1000Base-X SFP + 6-Port Gigabit TP/SFP + 4-Port 10GBase-X SFP+
► Support SFP hot plug
► Support full rate, full-duplex non-blocking forwarding at each port
► Support layer 3 network management
► Support 32K MAC learning, 8Mbit storage and forward cache space, 176G back plane bandwidth
► Supports to substitute central fiber converter, simplify network structure, lower network establishing cost, reduce device fault
► All optic ports, strengthen the an-interference ability
► Metal casing design, better for heat dissipation
► 1U19-inch standard chassis
Hardware Specification |
|
Standards: |
IEEE802.3 10Base-T Ethernet |
IEEE802.3u 100Base-TX/FX Fast Ethernet |
|
IEEE802.3ab 1000Base-T |
|
IEEE 802.1d Spanning tree protocol |
|
IEEE 802.1w Rapid Spanning tree protocol |
|
IEEE 802.1s Multiple Spanning tree protocol |
|
IEEE 802.1p Class of service |
|
IEEE 802.1Q VLAN Tagging |
|
IEEE 802.1AB-2005, LLDP |
|
IEEE 802.1Qbb priority flow control |
|
IEEE 802.3x Flow Control and Back pressure |
|
IEEE802.3z 1000Base-SX/LX Gigabit Ethernet |
|
IEEE802.3ae 10GBase-X |
|
IEEE802.1ax Link Aggregation |
|
IEEE802.1ak - Multiple Registration Protocol |
|
SFP/mini-GBIC Slots: |
48 x 1000Base-X SFP interfaces, from port 1 to port 48 |
Combo Port: |
6 x 1000Base-X SFP or 10/100/1000Base-T |
10GBase-X SFP+ Slots: |
4 x 10GBase-X SFP+ interfaces |
Switching Fabric: |
Up to 176Gbps |
Packet Forwarding Rate |
131Mpps |
Processor |
RISC 600MHz |
Flash Capacity |
8MB |
Memory Capacity |
64MB, Max. 512MB |
Address table |
32K |
Queue Buffer |
64MB |
Network Cables: |
10/100/1000BASE-T: 1G--Cat 5e/Cat 6/Cat 6A/ Cat 7 100M--Cat 5/Cat 5e/Cat 6/Cat 6A/ Cat 7 Cat 5/5e/6/6A/7 UTP cable (100 meters, max.) EIA/TIA-568 100-ohm STP (100 meters, max.) 1000BASE-X: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 220/550m/2km 9/125μm single-mode fiber optic cable, up to 20/40/80/120km (vary on SFP module) 10GBASE-LR/SR/BX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m 9/125μm single-mode fiber optic cable, up to 20/40/80km (vary on SFP module) |
Management |
|
Basic Management Interface: |
Console; Telnet; Web browser; SNMP v1, v2c |
Spanning Tree: |
Support STP, RSTP, MSTP Support PVST/PVST+ |
VLAN |
Support port-based VLAN Support MAC based VLAN Support 802.1Q tag VLAN Support Super VLAN Support for Private VLAN Support GVRP Dynamic VLAN Configuration Support QinQ and Smart QinQ Support Voice VLAN |
Flow Control |
Based on a standard IEEE 802.3x flow control Using IEEE 802.1Qbb priority flow control Support CAR Function |
Broadcast Control |
Restraining broadcast storm, stop sending so long as reaching a critical point |
Multicast Control |
IGMP Snooping multicast message automatic monitoring |
Port Binding |
Each group
of a maximum of 8, while support 32 group |
Port Mirroring |
Support based on flow classification mirroring and port mirroring |
Stacked |
Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
Strategy Routing |
Support based on IP strategy routing |
The Proxy Function |
Support Proxy ARP, DNS Proxy |
Redundancy Backup |
Support for VRRP, HSRP Hot Standby Router Protocol |
Characteristics of DHCP |
DHCP Server, DHCP Client and support DHCP relay |
Function of NAT |
Support the static or dynamic NAT address translation function |
Safety Characteristics |
Port Security (Port Security) function
Hardware
support for IP ACL, MAC ACL, Vlan ACL
User
classification management and password protection |
Quality of Service |
IEEE
802.1Qau congestion mechanism |
Network Management |
SNMP
v1/v2/v3 |
High Performance |
With 176G backplane bandwidth Hardware routing, wire-speed L3 switching packet forwarding rate up to 130.944Mpps Can be deployed in the core of MAN, and provides several final 1 km technology |
Safety |
Provide DOS, distributed denial of service, deception and virus defense Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and strategy control technology Restrict maximum number of connected hosts port, with multi-channel Ethernet interface binding, increasing Bandwidth and system redundancy Powerful ACL, support for L2-L4 layer data filtering Support QinQ function Strategy control list, flow regulation |
Easy to use and maintain |
Use clustering technology, support multiple device stack, with a unified IP address to carry on centralized management to Save address resources A variety ways of management via Web, SNMP etc. Support XModem protocol, can be used to upgrade software and BootRom by TFTP/ZMODEM Support DHCP server and relay functions, dynamic allocation of IP address Support SFP+, also downward compatible XFP Provide redundant power supply, fast failover and fast connection, greatly increasing system reliability |
Powerful Flow and Broadcast Management |
Automatically detect and suppress broadcast storm, support for IGMP packet detection, effectively restrict broadcast packets flooding Support full duplex mode and half duplex mode flow control Support Ethernet interface 1M step rate limit Advanced buffer management, support 802.1p protocol, each port 8 transmit queues mapping 8 priority of 802.1p Support IP multicast and QoS |
Different kinds of routing strategy |
Support static routing Support RIP v1/v2, OSPFv2, BGPv4 and other dynamic routing protocol Support PIM-SM, PIM-DM, DVMRP and other multicast routing protocol MPLS-based exchange routing and ECMP-supported routing balanced loading |
Environmental |
|
Operating Temperature: |
-10°C to 60°C (14°F to 140°F) |
Storage Temperature: |
-40°C to 80°C (-40°F to 176°F) |
Relative Humidity: |
5% to 95% non-condensing |
Storage Humidity: |
5% to 95% non-condensing |
Electrical and Mechanical |
|
Input Power: |
110-240VAC adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
Power Consumption: |
80W |
LED Indicators |
|
PWR: |
Power Status |
SYS: |
System Activity |
STK: |
Stack |
Dimensions (WxDxH): |
442 x 285 x 44mm |
Weight: |
5KG |
Casing: |
Metal Case |
Mounting Options: |
Rack Mount |
Regulatory Approvals |
|
CE, RoHS, FCC |
Model |
Description |
UF-FS48G6C4X |
L2+ Managed 48-Port 1000Base-X SFP + 6-Port Gigabit TP/SFP + 4-Port 10GBase-X SFP Optical Fiber Switch |
SFP |
1000Base-X SFP or 10GBase-X (to be purchased separately) Please select your SFP on our SFP Modules page for details. |
Mounting Options: |
► Rack Mount |
Power Options: |
► 110-240VAC, 47-63HZ |